GODHAND GH-SPN-120-L God's Hand Five-Star Scissors Left-Handed Version [Online Store Only, Limited to 1 Piece Per Person]

Amazing sharpness for smooth cutting!
The ultimate shears for left-handers!

▼Single-edge specification
The single-edge structure of the bevel pliers adopts a cutting principle similar to that of a kitchen knife and a cutting board.
When the Ultimate Bevel Pliers L is used in the left hand and viewed from the side without laser engraving (front), the right blade does not have a cutting function.
The right blade acts as a chopping board to fix the object being cut, and is called the "chopping blade".
The left blade acts as a "cutting blade" to cut cleanly.
Because the chopping blade can firmly fix the object being cut, the cutting force will not be lost and can be directly transmitted to the cutting blade.

The "cutting edge" and "anvil edge" configuration of the left-handed Ultimate Bevel Pliers L is completely opposite to the standard Ultimate Bevel Pliers (right-handed).

Q&A Zone

🆀Do left-handed people have to use the left-handed model?
🄰Not really.

The only difference between the left-hand and right-hand versions is:

・Different handle colors

・Opposite cutting blade directions

Detailed principle description:
・When using the bevel pliers corresponding to your dominant hand, the cutting blade will press down from the top to cut
・If operated with your non-dominant hand, the cutting blade will push up from the bottom to cut

Operation diagram:
↓ When using the standard version with the right hand, the cutting blade presses down from the top (the cutting blade is shown above)

※ If the right hand uses the left-handed version by mistake, the cutting edge will be pushed up from the bottom

Suggestions for left-handed users:
・When using the standard version, the cutting edge will push up from the bottom
・When using the left-hand version L, the cutting edge will press down from the top (helpful for observing the cutting point)
・The viewing angle problem can be solved by "adjusting the part direction by secondary cutting"

Important supplement:
✓ Choose according to personal habits, there is no absolute advantage or disadvantage
✓ Some users prefer the non-dominant hand version
✓ All models maintain the same cutting accuracy

Specification details

・Applicable materials: plastic (PS resin, PP resin, ABS resin, PE resin)
・Cutting capacity: can only cut materials with a diameter of 3mm or less (transparent/translucent hard PS resin is limited to less than 1mm)
・Total length: about 120mm
・Weight: about 60g
・Single-blade structure
・With original protective cover

⚠ Notes

・This is a precision cutting pliers that pursues cutting performance. If used incorrectly, the blade may be damaged or broken.
・Even light force can cut, so do not apply unnecessary excessive grip force.
・Do not touch the tip of the "cutting edge" directly with your hands. The "cutting blade" is a sharp tool that may cause injury.
・Sebum causes rust. If you come into direct contact with metal parts, wipe off fingerprints thoroughly and apply rust-proof oil.
・Humidity also causes rust, so please oil it frequently during the rainy season.
・If the lubrication performance of the movable parts decreases, it will cause wear on the shaft, and the cutting performance may deteriorate due to looseness. Please add lubricating oil to the movable parts regularly.
・To ensure safety, please wear goggles when using.
・The cut material may fly around, so please make sure that there is no one around and no fragile objects before working.
・Keep out of the reach of children.
・When not in use, please attach the included pliers protective cover, etc., and pay attention to safety protection.