GODHAND GH-SPN-120-CS Classic God's Hand Five-Star Scissors [Online store only, limited to 1 piece per person]

Re-creating the original "slim tip" design as requested by experienced users!

This product uses the same "slim tip" design as the original Ultimate Bevel Pliers.
Although the tip is more easily damaged, it allows you to easily find the sweet spot to work in tight spaces.

What is the "sweet spot"?

This term is widely used in sports, audio, business and other fields, meaning the "optimal operating position".

In the use of bevel pliers:
・The closer to the tip, the easier it is to disperse the force
・The closer to the root, the smoother the cutting effect
・However, due to manufacturing process limitations, there is no blade design near the root
・Therefore, the middle area of the blade is called the "optimal cutting point"

The slender tip design is not used for cutting at the tip.

Q＆Ａ专区

🆀Why is the "Slim Tip" called the "Classic Edition"?
🄰The original Ultimate Bevel Pliers had a slimmer tip than the current model.
However, as many users reported that the tip was easily damaged, we gradually improved the blade width and eventually launched the current version with a tip that is less likely to break.
However, some long-term users of the early slim tip version think that the current version is too thick and difficult to operate, and often say that "the early model is easier to use."
In response to these demands, we reproduced the appearance of the early model and launched the "Classic Edition" (reproduction).

🆀The tip of the classic version seems to break more easily than the current version, which is worrying...
🄰The instruction manual of the Ultimate Bevel Pliers originally stated "Please cut near the middle of the blade", and it is not a tool designed to cut with the tip of the blade. If you are still worried, we also have the [Ultimate Bevel Pliers TypeMS] with only the "cutting board blade" thinned out for you to choose from.

Specification Details

・Total length: about 120mm
・Weight: about 60g
・Applicable materials: plastic (PS resin, PP resin, ABS resin, PE resin)
・Cutting ability: (without using the tip of the knife) can only cut applicable materials with a diameter of 3mm or less
(but transparent/translucent hard PS resin is limited to less than 1mm, and it is strictly forbidden to use the tip of the knife to cut

⚠ Notes
・This product is a special replica version, different from the current design, and does not provide any warranty for blade breakage.
・Please read the instructions on this page carefully before purchasing and using.

・This is a precision pliers that pursues cutting performance. If used incorrectly, it may cause the blade to be damaged or broken.
・Even light force can cut, so please do not apply unnecessary excessive grip force.
・Do not touch the tip of the "cutting blade" directly with your hands. The "cutting blade" is a sharp tool and may cause injury.

・Sebum will cause rust. If you touch the metal part directly, please wipe off the fingerprints and other parts thoroughly and apply rustproof oil.
・Humidity will also cause rust, so please oil it frequently during the rainy season.
・If the lubrication performance of the movable parts decreases, it will cause shaft wear and the cutting performance may deteriorate due to looseness. Please add lubricating oil to the movable parts regularly.

・To ensure safety, please wear goggles when using.
・The cut material may fly around, so please make sure that there is no one around and no fragile objects before working.
・Please keep out of the reach of children.
・When not in use, please install the included pliers protective cover and pay attention to safety protection.